Kenwood Stereo Speakers
 |
Kenwood KAC-7204 1000-Watt Max Power Stereo Bridgeable Amplifier with Variable LPF/HPF List Price: $250.00 Sale Price: Too low to display Average Rating:   |
|
Amazon.com Product Description Sound enthusiasts buy Kenwood amps for their superior quality, and the KAC-7204D is no exception. This compact 2-channel amplifier features a sturdy cast-aluminum chassis that is 30% smaller than last year's model and supplies 1000 Watts Max Power... |
 |
Kenwood KCA-IP101 Automotive Spec iPod 1 Wire Direct Cable List Price: $50.00 Sale Price: $16.49 Average Rating:  |
|
connect your iPod to select 2008-up Kenwood stereos |
 |
Kenwood KCA-XM100V XM Interface Adapter List Price: $130.00 Sale Price: Too low to display Average Rating: |
|
XM Satellite Radio adapter for 2008-up Kenwood audio/video receivers * includes a vehicle dock and antenna * connects XM CNP2000 Mini-Tuner to compatible Kenwood receivers * warranty: 1 year * |
Before I explain the removal procedure of the Fiat radios listed below I would recommend that you ask your Fiat dealer to release your radio for you as they have specialist radio keys and they should release it for you for FREE. You do have a Fiat car, right? So they shouldn't charge you for a 2 minute job.
But if you are happy to attempt this yourself, letÂ’s go. Removing one of the following Fiat radios can literally take either 2 minutes or an hour if you aren't using the Fiat radio removal keys. Some release very easily but some can be really awkward and you may want to get someone to give you a hand while doing this. However, they all use the same release mechanism.
Fiat Radios with this mechanism:
AD-182 H
AD-182 H2
AD-182 H3
AD-185
As you look at the radio, there are 2 clips on either side of the radio, making a total of 4. The top 2 clips are located about one inch from the top of the radio on the side and the bottom clips are about one and some half inches from the bottom on the side of the radio. The clips can be accessed by sliding a solid thin object in between the radio edge and your dash. A Kenwood radio key, hacksaw blade or something similar should work OK.
I would recommend releasing one side of the radio at a time. To do this, keep your fingers in the radio cassette aperture to prevent it sliding back into the locators. The top clips are the easiest to release but the bottom clips can be quite awkward.
To release the top clips, slide the release tool close to the top edge of the radio on one side and then slide the tool downwards. You will feel the resistance of the clip, keep this in position while you release the bottom clip
Now slide a second tool in at the bottom of the radio on the side and slide upwards until you feel the resistance from the bottom clip. Try to push the clip backwards slightly as you raise it upwards if the clip will not release. This is the awkward bit, getting to raise it up high enough to release it fully from its locator.
Repeat for the other side and slide out the radio.
Do yourself a favor, then. Go to this site: car-audio-products-and-accessories.com and read the installation articles. They cover much on car audio installation. They will help you do a better job of your car audio installation.
However, if you choose to use the pros, go here for a professional installer if you're in the UK.
Chimezirim Odimba writes for CarAudioPlus.
Toyota Camry - How to install stereo speakers tweeters remove door panel Gen 5 2002 - 2006
You must log in to post a comment.